Holley Sniper EFI Fuel Tank System with 255 LPH Pump - 1963-1967 Corvette - 18 Gal.

Holley and Sniper will help you to complete your EFI swap with our new EFI Conversion Fuel Tanks. Each tank is a direct fit for your application-no modifications necessary. The kit includes the tank, a 255 lph fuel pump, internal baffling and a fuel level sending unit. The tank is powder coated for corrosion resistance and great looks. These tank kits are a complete solution for your EFI project!

You must use your existing stock filler neck or purchase one through restoration suppliers.

This kit includes a fuel gauge sender for use with factory fuel gauge and wiring. The sending unit uses a three wire connection. If you are using an aftermarket gauge, you will also need a sending unit for that gauge ohm range.

Supports up to 550 EFI HP (@ 60 PSI at 13.5 Volts / 10.4 AMP Draw)

Size: 38" x 15-3/4" x 11-3/4"

Features

• Tanks are coated galvanized steel then powder coated silver for total corrosion protection
• 255 lph fuel pump with hanger assembly gives you the fuel you need with in-tank quietness
• Sender has ¼" NPT Supply and Return line ports for easy fuel line connection and a barbed vent fitting
• Fuel level sender included with the correct ohm range for your factory gauges
• Fuel pump and sender are recessed in the tank to provide an easy installation with no modification to your car
• EFI style tank baffling includes a large 4.3 liter internal fuel tray to prevent fuel pump starvation
• Fits and looks like an OE tank when installed
• Complete bolt in solution for your EFI conversion
• Includes new tank straps

Notes

• When installing sending units, please remember to rotate the unit until the mounting holes align with the flange holes in the tank.
• This kit includes a fuel gauge sender for use with FACTORY FUEL GAUGE and wiring. The sending unit using a three wire connection.
• A wiring schematic is shown in the product images.
• When testing the ohm range of the sending unit with a stock Corvette gauge you should have the following results:
• Sender & Power (white & red wires)= 0-120 OHMS
• Sender & Ground (white & black wires)= 120-0 OHMS
• Power & Ground (red & black)= 120 Constant